Case Study     Precision POM Gear · Power Transmission

Parameter Specification
Process Injection Molding + Secondary Machining
Material POM (Polyoxymethylene)
Application Power Transmission / Gearbox
Critical Features Tooth Geometry, Bore Diameter, Concentricity
Tolerance According to Approved Drawings

Key Challenges and How We Solved Them

Our client, a manufacturer of power transmission assemblies, was facing critical quality issues with their custom POM plastic gears. Inconsistent molding shrinkage and dimensional variations were causing poor gear meshing, unreliable shaft fits, and compromised transmission performance.

Product Challenges


  • Gear tooth deviations affected meshing accuracy and backlash control.

  • POM shrinkage and warpage caused dimensional variations after molding.

  • Bore diameter and concentricity deviations affected shaft fit and rotational accuracy.

  • Inconsistent critical dimensions increased the risk of assembly problems between production batches.
  • Our Solutions


  • Controlled injection molding parameters to minimize shrinkage and warpage.

  • Applied secondary machining to achieve specified bore dimensions and assembly tolerances.

  • Selected POM for its low friction and wear resistance in gear applications.

  • Inspected tooth geometry, bore diameter, and concentricity against drawing requirements.
  • Production Photos & Process Records

    POM Gears Injeciton Molding Process
    Gear Secondary Machining
    Custom Gears Quality Inspection
    Plastic Gears Production

    Note: This project is covered by a confidentiality agreement. Certain details have been anonymized,and the publicly displayed information has been approved by the client.

    Quality Inspection

    Bore Diameter

    Verified for the required shaft fit.

    Gear Geometry

    Inspected according to specified gear features and applicable inspection requirements.

    Concentricity / Runout

    Verified where required by the drawing.

    Gear Dimensions

    Checked against drawing specifications.

    Final Acceptance

    Based on actual inspection results and approved tolerances.

    Start Your Custom Project

    Have a similar part in mind? Share your drawings or specs, and our engineers will respond within 24 hours with a feasibility review and quote.
    Write a Quote
    Scroll to Top